Home/Small Business Network IP Address Guide
Every device attached to your home network has an IP address, but what is a
IP address and why is it needed?
First image 4 computers linked together on a network. Now if computer
A want to send data to computer D . How does computer D know that the
data is intended for computer D and not for computers B or C?
The answer is that each computer has an address. To be accurate the
computer has two addresses, one known as the MAC or physical address
which is actually the address of the network card and cannot be changed.
The other address is the IP address or network address which can be
changed.
The IP address is the important address as far as we are concerned as
it is a logical address meaning it is assigned by us, and can be
changed. It is this address that is used, not only for getting data
between two computers on your home network, but also between your
computer and any other computer in the world.
The IP address appears like this:
192.168.0.1
The address has four components each component is separated by a
dot(.). So it is of this form:
a.b.c.d
Where the value of a,b,c or d is 0-255 decimal. Now as far as we are
concerned, all you need to remember when assigning these addresses to a
computer, is that,
each computer has a
unique address.
Assigning Computer Addresses
So if we had our network of 4 computers then we would give each an
address like this:
| Computer |
IP address |
| computer A |
192.168.0.1 |
| computer B |
192.168.0.2 |
| computer C |
192.168.0.3 |
| computer D |
192.168.0.4 |
If we have look at this address assignment on a Windows machine then
this is what we see:
The first thing you should notice is that there are several other
entries besides the IP address.
The only one that is absolutely necessary is the subnet mask.
Getting into the nitty gritty of sub-netting is a course on its own,
but as far as we are concerned all we need to do is to make sure that
each computer has the same sub-net address; in this case 255.255.255.0.
So our computer address assignment table would now look like this:
| Computer |
IP address |
Subnet Mask |
| computer A |
192.168.0.1 |
255.255.255.0 |
| computer B |
192.168.0.2 |
255.255.255.0 |
| computer C |
192.168.0.3 |
255.255.255.0 |
| computer D |
192.168.0.4 |
255.255.255.0 |
Default Gateway
You may also notice that the default gateway address is undefined. So
what is the default Gateway?
The default gateway is the way out of your network to the Internet.
It is in effect the address of the router box that connects you to the
Internet. So if we assume our router has an address of 192.168.0.100
then our address table now looks like this:
| Computer |
IP address |
Subnet Mask |
Default Gateway |
| computer A |
192.168.0.1 |
255.255.255.0 |
192.168.0.100 |
| computer B |
192.168.0.2 |
255.255.255.0 |
192.168.0.100 |
| computer C |
192.168.0.3 |
255.255.255.0 |
192.168.0.100 |
| computer D |
192.168.0.4 |
255.255.255.0 |
192.168.0.100 |
Notice how the default Gateway address and the subnet mask are the
same for each of our computers and only the IP address is different. If
you aren’t connected to the Internet thenthere
is no need for a default Gateway entry.
Checking the Configuration
On a windows machine open a command line and type
ipconfig and the
following is displayed

Here the default gateway is 192.168.1.1. This is the IP address of
the Router.
Problems With Manual Address Assignments
Manually assigning addresses as described above is seldom done
because of how easy it is to make mistakes. It is also not useful for
people with laptops who move from an office network to a home network
and vice versa.
Even though it is not normally done you should be aware of how to do
it.
Automatic Address Assignments
If you examine the TCP/IP properties dialogue box above you will see
and option radio box “obtain an IP address automatically”. This is
normally enabled along with the option “obtain DNS server
address automatically“.
By enabling both of these the computer picks up its IP address,
subnet mask, default gateway address and DNS server address
automatically from a DHCP server.
A DHCP (dynamic host configuration Protocol) server is an integral
part of the NAT router used to connect to the Internet and requires no
configuration on your part.
If you are configured for automatic address assignments and you
experience networking problems then you can check that you have been
assigned a IP address etc by opening a command line and typing
ipconfig .
If no IP address has been assigned then the IP address will be
either:
0.0.0.0 or 169.254.x.y
The 169.254.x.y address range was introduced in windows 2000 and
allows windows XP machines to automatically allocated themselves IP
addresses in the absence of a DHCP server.
What it usually means is that the local computers can communicate
with each other but not the Internet.
Useful Resources|SiteMap|Privacy
Policy|Contact|About
Me|
--------------------------------------------------------------------
|